Tools

On-Line Shop > General Tools > Tools

Slec Propeller Balancer Ref: TG906
SLEC SL93 Propeller Balancer for RC Planes and Quads

This is a must for any serious aero modeller using 'glow, diesel or petrol motors. Vibration can cause a real problem. Few if any propellers are balanced by the manufacturer. Servos, switches, plugs & sockets, can all be seriously affected, as well as the rest of the airborne gear. Engines too, also suffer with increased wear when subjected to excessive vibration, not to mention possible damage to the airframe itself. Nothing is safe from the destructive force.

More...

Price: £9.95

Quantity:

Slec Balsa Stripper Ref: TG904
This Balsa Stripper is the one we use! It is not supplied with a 10mm x 1 metre aluminium 'U' channel, which is readily available in B&Q to avoid postal problems. Suggest U channel is screwed to a 75mm wide batten strip and clamped to a secure surface when in use. Using the spacers supplied a variety of strip widths can be cut.

More...

Price: £14.95

Quantity:

Logic Body Reamer Conical & Curved Lexan Shears Ref: TG905

More...

Price: £11.95

Quantity:

JP 3 Jaw Pin Chuck Ref: TG0905
Enables small drill bits to be held in larger drill machines
Suitable for drill sizes 0.6-3.2mm
Tommy bar included

Price: £4.95

Quantity:

Logic Hex Ball Wrench Set Ref: TG000005
Logic 7pc Hex Ball Wrench Set - 1.5-6mm

More...

Price: £4.95

Quantity:

Ripmax Adjustable Phillips/Flat Screwdiver Ref: TG0005
This handy little screwdrive suits both cross and flat head screws. Simply press the ring and the shaft is removable allowing you to flip between the different heads. There are 12 machined locking points on the shaft allowing you to lock the shaft at various lengths for different uses. The handle is moulded from soft rubber and the curved shape is easy to grip.

More...

Price: £2.25

Quantity:

Carbide Router End Mills Ref: RB001
Carbide Router End Mills 3.17 shaft diameter, 38mm long. Sizes 1.2 - 1.6mm dia. Suitable for cutting wood, plastic and epoxy board etc. Please note carbide drills/bits are very hard but brittle and if dropped on a hard surface will break!!

Price: £2.50

Please Select Size

Quantity:

Carbide Router End Mills 4 off Deal Ref: RB002
Carbide Router End Mills 4 off Deal. Please select size

Price: £9.00

Please Select Size

Quantity:

David Combi Plane Ref: TG013
The Combi Plane features a durable aluminium body and three blade positions - each offering fully adjustable blade heights Perfect for shaping and smoothing both flat and concave surfaces
Unity Quantity in Pack - 1 plane with two double sided blades

Price: £15.95

Quantity:

David Combi Plane Spare Blades Ref: TG015
Unit Quantity in Pack - 10 blades

Price: £7.95

Quantity:

Mini Archemedian Push Drill Ref: TG400
Steel constructed push drill

More...

Price: £5.95

Quantity:

Archimedian PCB Drill Ref: TG401
Comes with 2 collets

More...

Price: £8.95

Quantity:

Prolux Digital LCD Thermal Sealing Iron W/Stand Ref: TG305
For any heat shrink film or fabric covering. Teflon coated shoe and safty holding stand. New low profile head makes getting into tight spots a real cinch. Tight fillets and curves will be easier to seal and shrink down speeding up the covering process. LCD Digital display allows for full temperature control.

More...

Price: £31.95

Quantity:

Ripmax Custom Sealing Iron Ref: TG010
When you're covering with heatshrink film, you need a lightweight iron with an accurate temperature control. The Custom Sealing Iron holds its temperature superbly, fits the hand comfortably and has a coated shoe that glides over all types of shrink film and 'tex finishes. Supplied complete with plug and aluminium stand. Currently out of stock due Mid October

More...

Price: £24.95

Quantity:

Ripmax Small Stainless Scissors with Micro Teeth Ref: TG210
These small scissors allow access into tight areas, are beautifully made and built to withstand the toughest materials. Each blade features an extremely sharp serrated edge (micro teeth) allowing the scissors to grab the material as it cuts it.

More...

Price: £4.75

Quantity:

4-ps Stainless Steel Tweezer set Ref: TG032
Tweezers are frequently required for picking up those small items from hard to get at places.

Price: £10.95

Quantity:

Dubro Kwik-Hinge Slotter Ref: TG026
This Kwik-hinge Slotter centres and acts as a guide for perfectly aligned slots for any hinge. Blades fit No 2 type handles. Includes 3 snap-on jig guides for hole centring, mini hinges and large hinges. Drill and handle not supplied.

Price: £5.25

Quantity:

Z Bend pliers Ref: TG020
The only way to produce accurate z-bends in piano wire. One simple squeeze of the handles and you've got a finished linkage end.
Unit Quanity in Pack - 1

Price: £12.95

Quantity:

Antex 25w Soldering Iron Ref: TG011
This 25W Antex soldering iron is suitable is fitted with a super flexible silicone lead which makes the iron easier to use than those fitted with the cheaper, stiffer and less heat resistant PVC lead. There are a variety of solder tips available to fit this iron to suit a variety of soldering tasks.

Price: £32.95

Quantity:

Antex Soldering Iron replacement Bit 2.3mm Ref: TG022
Replacement soldering bit for above iron. 2.3mm spade.

Price: £4.95

Quantity:

Antex Soldering Iron replacement Bit 3mm Ref: TG023
Replacement soldering bit for above iron. 3mm spade.

Price: £4.95

Quantity:

Antex Soldering Iron replacement Bit 4.7mm Ref: TG024
Replacement soldering bit for above iron. 4.7mm spade.

Price: £4.95

Quantity:

Resin core solder Ref: DA076
Resin core solder

Price: £1.50

Please Select Size

Quantity:

Easy-Flo Silver Solder Flux 30g Ref: TG012
Easy-Flo Silver Solder Flux 30g

Price: £4.50

Quantity:

Modelling pins 30mm x 0.6mm Ref: AM065
Glass Headed modelling pins. 40 per card.

Price: £2.95

Quantity:

Modelling Pins 48mm x 0.8mm Ref: AM066
Thes extra long glass headed hardened steel modelling pins are very useful particularly when aligning components for gluing when the normal 30mm pins are a little too short. 40per pack.

Price: £3.25

Quantity:

Dubro 845 Mini Connectors 2 per pk. Ref: AM001
Ideal for Park Fliers

2 per pk. Quick Connectors for a simple linkage connection from MP Jet, for small electric models..

Price: £3.95

Quantity: