Pzazz Sport Aerobatic Slope Soarer  Ref: SK001
	The original Pzazz was designed as an entry level 60in Pylon Racer. To encourage modellers to have a go at this then new slope racing class with the only R/C equipment being required were 2 standard servos, a square AA Rx battery and any serviceable receiver. Times have moved on so the Mk2 Pzazz is now fitted a cross-tail and designed to take advantage the reduction in price of micro metal geared servos and computerised transmitters with a Flapperon function. Construction consists of a fullly sheeted built-up wing with a strong balsa ply fuselage. The Pzazz is has a good turn of speed with an aerobatic performance only being limited by flying conditions and pilot imagination / ability. Specifications: Span: 1520mm (60ins) Weignt: 890gms Control: Rudder/Aileron /Elevator/Flapperons (optional) Section: Modified Eppler 205 Radio Control Equipment: 4/6ch Reciever Standard size Servo 3 off Micro metal gears servos (HS82MG New Power XL-16HM/17HMB 4.8v Square AA Rx Battery Switch Harness 2 off 300mm Servo Ext. Leads